Welcome to Day 9 of Blogmas At Home 2025! ๐๐โจ
Every Christmas, I make a whole load of my family’s favourite Peppermint Bark. We were sent some homemade peppermint bark as a gift many years ago and, ever since, it just hasn’t been the festive season without a full jar of the stuff!
However, my sister-in-law, Amy, is not a huge fan of peppermint, so, obviously, that particular bark isn’t exactly her treat of choice. Last year, we sat down and brainstormed some ideas for a zero-peppermint alternative and we landed on this: a Rocky Road-inspired bark, with a 50/50 blend of milk and dark chocolate with raisins, marshmallows and digestive biscuits.
In today’s post, I’m sharing the recipe for Amy’s Bark: a fun, festive alternative to peppermint bark (for the candy cane-haters and the rocky road-lovers alike!).
Table of Contents
Ingredients

To make Amy’s Bark, you will need:
- Dark chocolate
I like to use a 50/50 blend of dark and milk chocolate for this recipe. The dark chocolate that I use contains about 72% cocoa solids (so relatively dark). When combined with the milk chocolate, you get a perfectly sweet (but not-too-sweet!), chocolate base. However, if you prefer, you can use all dark or all milk: it’s up to you!
- Milk chocolate
The milk chocolate that I use for this recipe contains about 32% cocoa solids.
- Digestive biscuits
Biscuits add great crunch and texture to the bark. Digestives are a classic biscuit here in the UK and a key feature of our Rocky Road. They’re great, because they add a slight saltiness, which balances out the sweetness of the other ingredients, but feel free to experiment with different biscuits!
- Raisins
Dried fruit adds sweetness, tartness and a bit of a chew to bark. You can use raisins or sultanas for this recipe (I actually prefer sultanas myself, because they’re seedless!), but you could also really branch out and use dried cranberries, cherries or even chopped, dried apricots!
- Mini marshmallows
Marshmallows add even more chew and sweetness. I prefer to use mini marshmallows so they can be easily distributed throughout the bark (and it’s a lot less sticky than cutting up bigger marshmallows!).
Method
Amy’s Bark is pretty simple to make: the only tricky part is tempering the chocolate! Once the chocolate is in temper, you need to work fast, so it’s best to get everything weighed out and ready before you start:
- Line a baking tray with greaseproof paper.
- Weigh out the marshmallows and raisins and have them to hand, ready to sprinkle over the bark.
- Break the digestive biscuits up into very small pieces (this helps to keep the bark relatively thin and ensures that the biscuits are evenly distributed throughout the chocolate).

Tempering the Chocolate
To make Amy’s Bark, you start by tempering the chocolate. This ensures the finished bark sets properly at room temperature and has a great snap.

This chocolate tempering process is complicated by the fact that we’re using a combination of two chocolate types: milk and dark, so it’s a little different to the chocolate tempering instructions given here. Luckily, dark chocolate is actually the easiest to temper, so it’s easier to temper this mix than it is to just temper milk chocolate!
You’re welcome to use your favourite method for tempering chocolate, but this is what I do:

Roughly chop all of the chocolate (milk and dark). Transfer about 4/5 of the chocolate to a heatproof bowl and microwave on the lowest setting for 1 minute (if you don’t have a microwave, you can do this over a pan of barely simmering water on the hob).
While the chocolate is in the microwave, continue chopping the remaining 1/5 of the chocolate so that it is super fine. We’ll use this later to help with the tempering process.
After 1 minute, give the chocolate a stir. It won’t look very different at this stage, so put it back in for another minute (don’t be tempted to skip the stirring step, though: chocolate can burn very easily, so you want to take it slow and steady).

Keep microwaving the chocolate in 30 second – 1 minute bursts, stirring in between each burst, until it is completely melted. Check the temperature as you go, using a probe thermometer: you want it to reach 45-47ยฐC. Don’t let the chocolate go any higher than 50ยฐC.

Once the chocolate has melted and is at the correct temperature, add a small amount of the finely chopped, reserved chocolate and stir it in well until it has melted into the rest of the chocolate. The additional chocolate is known as ‘seed chocolate’ and helps the melted chocolate to cool the right way. This, along with the stirring motion, is the key to perfectly tempered chocolate!
Keep adding seed chocolate and stirring, keeping an eye on the temperature of the chocolate, until it reaches 26-27ยฐC. If you run out of seed chocolate, just keep stirring the chocolate until it comes down to temperature (or chop up a little more chocolate, if you have it!).

Next, return the chocolate to the microwave and heat it very gently (5-10 second bursts on the lowest setting) until it reaches 30-32ยฐC. The chocolate is now in temper and is ready to use! You’ll want to work fast at this stage, because it will start to set quite quickly.
Assembling the Bark

Tip the broken up digestives into the bowl with the tempered chocolate. Mix them together quickly, but thoroughly, so that all of the digestives are covered in the chocolate. This helps to keep the biscuits slightly fresher and crunchier than if they were just scattered over the top of the chocolate, so your bark will last longer.

Tip the chocolate mixture onto the prepared baking tray and spread it out into a thin layer using an offset palette knife, or the back of a spoon/spatula.

Sprinkle over the raisins and marshmallows, pressing them down gently as you go to ensure that they stick to the chocolate. Continue to work quickly at this point, because if the chocolate sets too hard before the raisins/marshmallows are added, they won’t stick!

Set the bark aside at room temperature to harden completely (about 30 minutes).

Once firm, break the bark up into pieces and enjoy!

The bark can be stored at room temperature, but it’s important to keep it in an airtight jar/tin to keep the biscuits super crunchy. It can also be packaged up in little bags and given to your friends and family as gifts!
Recipe

Rocky Road Bark (Amy’s Bark)
Equipment
- 1 Baking tray lined with greaseproof paper.
- Thermometer
Ingredients
- 3 digestive biscuits
- 180 g dark chocolate
- 180 g milk chocolate
- 50 g raisins
- 25 g mini marshmallows
Instructions
- Break the digestive biscuits into very small pieces. Set them aside. Weigh out the raisins and mini marshmallows and set them aside too, ready for later.
- Melt and temper the chocolate (both the dark and milk, together). See post above for detailed instructions on how to do this.
- Working quickly, mix the broken digestives into the chocolate until completely coated.
- Tip the chocolate/biscuit mixture onto the lined baking tray and use an offset spatula/the back of a spoon to spread it out quickly into a thin layer.
- Sprinkle over the raisins and mini marshmallows, pressing them down gently into the chocolate to make sure they stick.
- Set the bark aside at room temperature until hardened (about 30 minutes) before breaking into pieces. Store in an airtight container at room temperature.


